Tablet Section Equipment

Description:

Multi Mill is widely used for wet and dry granulation pulverization etc. in Pharmaceuticals, Chemicals Cosmetics, Ceramics, Colors, Dyestuff, Food products etc. it is also used for application in Pesticides, Fertilizers, Spices, Detergents, Insecticides, Plastics and Resins Industries.

Salient Features:

• cGMP point of view machine is provided with SS cladding on base, pillar, machine chamber, SS cover on motor. No exposed painted surface on top of the machine.
• Beaters and shaft are made of stainless steel 316 quality and beaters are further hardened & Beaters are fitted on a shaft.
• Direction of beaters can be changed by reversible switch.
• Beaters assembly is swing type, dynamically balanced which reduces vibration and noise level and increases bearing life.
• 12 nos. Beaters are of knife and impact edges & 2 nos. beaters are of scrapper blades types.
• All contact parts are made of SS 316L quality and can be easily & quickly dismantled and cleaned.
• Cylindrical screen for higher output.
• Flameproof electrical components can be provided.

Optional Feature

• FLP Push button start/stop
• VFD – Variable frequency drive
• FLP electric motor

• Belt drive – with interchangeable speed.
• Direct drive

Description:

Double cone blender is one of the most common operation been used in different industries like pharmaceutical, food, chemical, cosmetic, detergent, fertilizers etc. This is been done in order to produce uniform bulk mixture as each unit contains the same proportion of each ingredient. And hence, double cone blender is been used for mixing dry powder and granules homogeneously. There are two types of machine been used in industries like double cone blender machine and dry powder mixing cone blender.

Salient Features:

• cGMP compliance
• contact parts AISI SS 316 / 316L
• The conical shape at both ends enables uniform mixing and easy discharge.
• The cone is statically balanced which protects the gear box and motor from any excessive load.
• Powder is loaded into the cone through a wide opening and discharged through a butterfly or a Slide valve.

• Depending upon the characteristic of the product, paddle type baffles can be provided on the shaft for better.
• ‘Slant’ design (off center) CLIN CONE BLENDER.
• Dust free bin charging system ensures minimum material handling.
• Mixing, uniform blending and de-agglomeration.

Optional Feature

• PLC controlled with HMI touch screen

• Flame proof electricals can be provided

We are engaged in offering a wide range of  Tablet Coating Machines to our clients. Our range of all products is widely appreciated by our clients.

Description:

Fluidized bed dryer is operated by the passage of heated air through perforated bed that supports the powder materials. If a gas is allowed to Flow upward through the bed of particulate solids at a velocity greater than the settling velocity of the particles and less than the velocity for pneumatic conveying, the solids are blown up and become partially suspended in the gas stream. Instead of gas, air can be assumed for the drying purpose. The resultant mixture of solids and gas behaves like a liquid and the solids are said to be fluidized.

This technique is very efficient and is used in drying granular solids as each particle is surrounded by the drying gas.

The size range of the particles, which can be fluidized, varies greatly from 1m – 2½ in diameter. It is generally concluded that the particles are distributed in size between 65 mesh to 10m and it is the best for the smooth fluidization.

Salient Features:

• cGMP complaint (current good manufacturing practice)
• Contact parts are AISI 316L
• Internal mirror polished
• Auto shaking filter bag
• Efficient heat and mass transfer gives high drying rate so that drying times are shorter than static bed convection dryer.
• A batch of tablet granules can be dried in 20–30 min, whereas in compartment bed dryer would require several hours.
• Capacity ranges from 5–350 kg.
• The fluidized state of the bed gives drying from individual particles and not from the entire bed.
• The temperature is uniform and can be controlled precisely.
• The mobile containers making the handling simple and reducing labor cost.
• It produces a free flowing product.
• Drying time is short,
• high output from a small floor space.
• Drying time is short,
• High output from a small floor space.

Optional Features:

• FLP Electricals
• AHU – Air handling unit

• PLC controlled with HMI screen touch

Description:

The unit consist of Specially designed vibratory motor to run on 400 / 440V, suitable HP, 3 phase, 50Hz. cycles electric supply ,with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the center of the base plate of screening unit. Screening unit consists of screen sandwiched between hopper and bowl with the help of special clamp with gasket. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.
Salient Features:

• cGMP compliance
• Noiseless, Maintenance free & high speeds
• Available in various models providing screening diameter of 12”, 20”, 30”, 36”, 48”, 72” etc.
• Portable and compact
• Electric power requirement less than other machine of the kind in the industries & lower energy consumption compared to reciprocating vibratory system
• All contact parts are AISI SS 316L

• SS lid with charging port and spring loaded outlets.
• Easy dismantling and cleaning facility for contact parts.
• Wide range of screen sizes 4-300 Mesh.
• The containers are mobile, making the handling simple and reducing labor cost.
• 04 Nos. wheel, 02 Nos swivel + 02 Nos lockable and swivel type to avoid displacement during operation.

Optional Features:

• Flame proof motor with FLP push button switch.

• Double & Triple deck screens with outlet

CGMP Fluid Bed Dryers with latest improved design makes this unit a truly versatile for Pharmaceutical, Food, Dyestuff, Agriculture & Chemical industries. Our Fluid Bed Dryer is capable of drying materials in any forms like granular, powder or crystalline. Fluid Bed Dryers (FBD) are used to dry materials by fluidization with hot air, and that will create turbulence in the wet product while flowing through it. Normally an initial moisture content upto 20% is ideal but materials with higher initial moisture content can be dried successfully.

We are engaged in offering a wide range of  Ribbon Blender Machine to our clients. Our range of all products is widely appreciated by our clients.

IPC Bin available in various capacity and customized design as per customer requiment and product suitability

Description:

Tray Dryer is an enclosed chamber insulated with high grade insulation sheets to avoid heat loss as well as ingress of air or any unwanted foreign material inside. Multiples of trays are placed one above the other in shelf form provided with trolley like arrangement to insert or removal of each individual as per requirement. Tray dryers are widely used for heating and drying of many domestic and industrial products chemicals, pharmaceutical products, food products, bakery products, etc. The dryer chamber is provided with electrical heaters or steam for circulation of heat and solid or wet materials are placed for processing. A special blower arrangement is provided inside the chamber to circulate hot air of required temperature as per process requirement. The control panel is installed at the outside of dryer and is equipped with numerous gauges for observation of air flow, temperature and other related parameters with timers.

Salient Features:

• Tray Dryers are available of different sizes and shapes as per clients’ requirements. These are made of AISI SS 316/ SS 316L or SS 304 as per requirement.
• These dryers are manufactured at our state-of-the-art manufacturing unit with all due care as per ISI Standards which follows all industrial norms.
• The quality of raw material is excellent and we make sure to fabricate such high class machines to operate at high temperature with full efficiency.
• The hot air circulation (flow, pressure and temperature, speed of blowers) is precisely control by operator with the help of few switches and whole process easily to get the work done
• The exhaust hot air or steam can be recoverable and fed into main stream which saves huge production cost and electrical consumption too.
• Available in various capacities as per clients’ requirements ranging from 6, 12,24,48,96,192 trays and total heating load from 4 KW to 24 KW.

Optional Features:

• FLP Electricals

• AHU (Air Handling Unit) for inlet

Documentation & Certificates

• Design Qualification
• Installation Qualification
• Operation Qualification
• Factory Acceptance Test

• Site Acceptance Test
• Sales drawing
• As built drawing
• Electrical drawing

• MOC Certificates
• Finish Certificates
• Calibration Certificates
• Warrantee Certificates